Eclipse
Round balls with slight flattening at pole ends(1). Available in 15 sizes from 3/32"-5/8"

PINS

Tapering to pointed ends, pins reach into recess of figured work and grooves, deflash through holes and clean threaded areas

Slim (s)

3/64" x 3/8"
3/64" x 1/2"
1/16" x 9/32"
16" x 1/2"   

Taper (T)

 3/32" x 3/8"
 1/8" x 3/8"
 1/8" x 1/2"
 5/32" x 1/2"

Abco
Round balls without flat ends for more critical finishing requirements.

CONES

Order by Size:

Dimensions
 .125 x .160
 .155 x .200
 .205 x .250
 .265 x .315

Order By Size:
1/8"
5/32"
3/16"
1/4"
5/16"

Dimensions
 .125 x .170
 .215 x .270
 .270 x .300
 .320 x .400
 .375 x .465

 1/8"   3/16"
 1/4"  5/16"
 3/8" 1/2" 

Center flange and tapered crowns provide contacts in angles and on curved surfaces. Small sizes ideal for ornamental designs.

Designed to combine the action of balls and cones with one scientifically proportional shape.

DIAGONALS

Order by size:
1/8"
5/32"
3/16"

7/32"
1/4"
5/16"
3/8"

Dimensions
 .125 x .125 x .225
 .156 x .156 x .275
 .187 x .187 x .325
 .218 x .218 x .380
 .250 x .250 x .445
.312 x .312 x .545
 .375 x .375 x .655

Available in Stainless Steels

Where complete freedom from rust is essential, we recommend 300 Series stainless steels. Most of the above shapes are available in this corrosion-resistant material

Beveled edges of diagonally-cut ends provide effective finishing action in corners. Cylindrical body offers wide area contacts.

ABCUT

Dia.
 7/32"
5/32"
 1/8" 

Length
 7/8"
 7/8"
 1/2"

OVALBALL

Introduces oscillating motion to finishing mass and provides more surface-to surface contace than balls.

Order by size:
 1/8"
 5/32"
 3/16"
 1/4"
 5/16"
 3/8"

Dimensions:
 
 .125 x .245
 .156 x .320
 .187 x .380
 .250 x .445
 .312 x .535
 .375 x .630

Patented abrasive surface puts teeth into finishing for fast, heavy deburring, burnishing and material removal. Available in three standard sizes.